24
8. When the last error doesn't exist .
CEC (H) output The CEC terminal high output of HDMI. Press [5] [5] in service mode.
CEC (L) output The CEC terminal low output of HDMI. Press [5] [6] in service mode.
Manufacturing Date Read out the manufacturing date of the unit.
YY: Year
MM: Month
DD: Day
Press[6][1]in service mode.
Tray OPEN/CLOSE Test The BD drive tray is opened and closed
repeatedly.
* is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remotes
Controller more than 10 seconds.
Delete the Laser Used
Time
Laser used time information stored in the
memory of the unit is deleted.
Press [9] [5] in service mode.
Delete the Last Drive
Error
Laser Drive Error information stored on the
BD Drive is deleted.
Press [9] [6] in service mode.
Delete the Error History Error History information stored on the unit is
deleted.
Press [9] [7] in service mode.
Initialization of the Error
code
Last Error Code information stored by timer is
deleted. (Write in F00)
Press [9] [8] in service mode.
Initialization of the
Service Mode
Last Drive Error, Error History and Error code
information stored on the unit are initialized to
factory setting.
Press [9] [9] in service mode.
Release Service Mode Release Service Mode and turns the Power
Off.
Display in STOP (SS) mode.
Press [POWER] button on the front
panel or Remote controller in ser-
vice mode.
Item FL display Key operation
Mode name Description (Remote controller key)
To Next Page
Loading...
