9
VQT4V11
Getting startedConnections & Settings
Connecting to a TV
Connect the power supply cord after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft.) or less.
≥ This unit consumes a small amount of AC power (> 33) even when turned off. For the purpose of
power conservation, the unit can be disconnected if you will not be using it for extended period of
time.
HDMI IN
HDMI cable
AC power supply cord (supplied)
To a household AC outlet
DMP-BD89_79_VQT4V11_eng.book 9 ページ ２０１２年１２月１７日 月曜日 午前９時１３分
To Next Page
Loading...
