Panasonic DMP-BDT120 - Network and Power Connections; Connecting to the Network; AC Mains Lead Connection

10
VQT3V62
STEP 3 : Connecting to the network
The following services can be used when this unit is connected to broadband.
For details about connection method, refer to the instructions supplied with the connected equipment.
≥ For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ See page 40 for the precautions of wireless LAN connection.
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
STEP 4 : Connecting the AC mains lead
≥ This unit consumes a small amount of AC power (> 39) even when turned off. In the interest of
power conservation, if you will not be using this unit for an extended period of time, it can be
disconnected.
≥ Firmware can be updated (> 12)
≥ You can enjoy BD-Live (> 17)
≥ You can enjoy VIERA Connect (> 19)
≥ You can access other devices (Home Network) (> 20)
≥ [BDT220] : This unit supports Wi-Fi Direct
TM
and can make a wireless connection to wireless devices
without router. You can use this function when enjoying Home Network feature, etc. Internet access
is not available while connected via Wi-Fi Direct
TM
. (> 20, 29)
Wireless LAN connection
– [BDT 220] : Wireless LAN is built in. (There is no need to connect a Wireless LAN Adaptor.)
– [BDT 120] : Connect the Wireless LAN Adaptor DY-WL5 (optional). Only DY-WL5 can be used.
Read the operating instructions for DY-WL5 thoroughly when using it.
[BDT120]
Wireless router, etc. Internet
≥ The unit is not compatible with public wireless LAN services (Hotspot etc.) provided in airports,
stations, cafes, etc.
LAN cable connection
LAN Cable
Broadband router, etc.
Internet
To a household mains
socket
AC mains lead (supplied)
DMP-BDT220EB-VQT3V62.book 10 ページ ２０１２年１月５日 木曜日 午後１２時２１分