Connections and settings
9
VQT3V62
STEP 2 : Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV
OUT, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only
be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is
also required to connect the amplifier/receiver and TV using an optical digital cable.
≥ Set “HDMI Audio Output” to “Off” (> 27).
≥ Set “Digital Audio Output” (> 27).
HDMI AV OUT
HDMI cable HDMI cable
Amplifier/receiver
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
≥ Set “Digital Audio Output” (> 27).
OPTICAL
Optical digital cable
Amplifier/receiver
DMP-BDT220EB-VQT3V62.book 9 ページ ２０１２年１月５日 木曜日 午後１２時２１分
To Next Page
Loading...
