Panasonic DMP-BDT310 - Connecting to a Broadband Network; LAN Cable Connection; Wireless LAN Connection

STEP 3 :
Connecting
to
a
broadband
network
The following services can be used when this unit is
connected
to
broadband.
•
Firmware can be updated
(Q
15)
•
You
can enjoy BD-Live
(Q
19)
•
You
can enjoy
VIERA CAST
(Q
23)
•
You
can access other devices (Home Network)
(Q
24)
•
LAN
cable
connection
Broadband router, etc.
Modem
(Broadband)
*Provided by
ISP
--
LAN
Cable
• Use category 5 or above straight LAN
cables (STP)
when
connecting
to
peripheral
devices.
• Inserting
any
cable other than a LAN
cable
in
the LAN
terminal
can damage the unit.
10
VQT3B58
For
details
about connection method, refer to the
instructions
supplied with the connected equipment.
• Wireless
LAN connection
-
I
BDT31
o
II
BDT21SII
BDT210
I
:
Wireless
LAN is
built
in.
(There is no need to connect a Wireless
LAN
Adaptor.)
- I
BDT110
I:
Connect the Wireless
LAN Adaptor
DY-WL
10 (optional).
IBDT110
I
Wireless
LAN Adaptor
LAN
Cable
Modem
(Broadband)
*Provided by
ISP
108ASE-
TJ
I
!XIIA.'if-TX
LAN
•
For up to date compatibility
information on your
Wireless
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For
additional information about this unit refer to
http:
//www.panasonic.com/consumer/support (For U.S.A.)
•
The unit is not
compatible
with
public wireless
LAN
services provided in airports, stations, cafes etc.
•IBDT11ol
-Only
the
Wireless
LAN Adaptor DY-WL
10 (optional)
can
be used.
- Read the operating instructions for
th
e
Wireless
LAN
Adaptor DY-WL
10 (optional) thoroughly
when using
it.
-To
simultaneously connect the
Wireless
LAN Adaptor
DY-WL
10
(optional)
and a LAN
cable,
use the extension
cable supplied
with the DY-WL
10
.