- 10 -
Connections and settings
Connections and settings
Connecting to a TV
Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or 24p (4K) signal,
please use HDMI cables 5.0 meters or less.
≥ This unit consumes a small amount of AC power (> 33) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
AC mains lead (supplied)
To a household
mains socket
HDMI cable
To Next Page
Loading...
