Panasonic DMP-BDT384 - Connecting to an Amplifier;Receiver

- 11 -
Connections and settings
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
≥ Set “Digital Audio Output” (> 25).
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
HDMI AV OUT
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
HDMI cable
HDMI cable
Amplifier/receiver
≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then
connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to
5.1ch.
OPTICAL
≥ Set “HDMI Audio Output” to “Off” (> 25).
≥ Set “Digital Audio Output” (> 25).
OPTICAL IN
Optical digital cable
Amplifier/receiver