EasyManua.ls Logo

Panasonic DMP-BDT570 - Page 26

Panasonic DMP-BDT570
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 26 -
Settings
24p / 25p Conversion
Play back videos with film-like motion.
When this unit is connected to a TV compatible
with 4K/24p or 4K/25p:
If “HDMI Video Format” (> 28) is set to
“Automatic”, videos will be output in 4K/24p or
4K/25p.
When this unit is connected to a TV compatible
with 1080/24p or 1080/25p:
If “HDMI Video Format” (> 28) is set to
“Automatic”, “1080i” or “1080p”, videos will be
output in 1080/24p or 1080/25p.
Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
If the video is disrupted when “Auto” is selected,
select either “Video” or “Film” depending on the
material to be played back.
Reset to Default Picture Settings
Return “Picture Settings” of the selected tab (“Set
1” or “Set 2”) to the factory preset.
Sound Effects
*1, *2
Select the sound effect.
Night Surround :
Enjoy a movie with powerful sound even when
the volume is kept low at night. The audio is set
in such a way that it can be heard easily.
Re-master :
This feature gives you brighter sound by
increasing the high frequency portion of the
audio.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
Digital Tube Sound :
This feature gives you a warm sound, like that
produced by a vacuum tube amplifier.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
Even when “96/88.2kHz” is selected, an audio
source with a sampling frequency of 96 kHz or
higher will be output with the original sampling
frequency.
When “Sound Effects” is set to “Off”, this setting
is disabled.
DSD Decode Sampling Frequency
Select the settings that suit your sound quality
preferences.
DSD LPF Setting
Select the settings that suit your sound quality
preferences.
*1
Not every function can be set individually.
*2
This function is effective for audio from HDMI AV OUT or
DIGITAL AUDIO OUT only when “Digital Audio Output” is
set to “PCM” (> 29).
Sound Effect Settings
Re-master 1 Pop and rock
Re-master 2 Jazz
Re-master 3 Classical
Digital Tube
Sound 1
A crisp, delicate sound
Digital Tube
Sound 2
A tight, hi-fi sound
Digital Tube
Sound 3
A soft, rich sound
Digital Tube
Sound 4
A clear, powerful sound
Digital Tube
Sound 5
A distinctive mid-range
sound
Digital Tube
Sound 6
A soft, enveloping sound

Other manuals for Panasonic DMP-BDT570

Related product manuals