Panasonic DMR-BWT460 - With Other Equipment; Recording from External Sources; Copying HD Video (AVCHD)

With Other Equipment
SQT1111
52
Recording from
external equipment
Recording mode: XP, SP, LP, EP
Preparation
• Connect the Set Top Box or video equipment
(> 10)
• If you want to change the recording mode
(> 22, To change the recording (conversion)
mode)
1 Press [INPUT SELECT] and select “AV”,
then press [OK].
2 Select the channel on the Set Top Box or
start play on the video equipment.
3 Press [REC ¥].
Recording will start.
4 Set the time to record. (> 22)
To stop recording
Press [∫].
Manually programming timer recording from
external equipment
Refer to “Manually programming timer recording”
(> 25).
• Following contents or media cannot be played back while
recording from external equipment.
- BD-Video
- MKV and AVCHD file
- photo
- music files other than CD-DA
- USB HDD (For data files, > 16) and USB memory
Copying the HD Video
(AVCHD)
§
“For data files (> 16)” only
e.g., Connecting to the Panasonic video camera
1 Connect the video camera or insert the media.
• Make the video camera ready for data
transfer.
The menu screen appears. (> 30)
2 Select “Copy Video ( AVCHD )”, then press
[OK].
3 When copying from a video equipment:
Select “Copy to HDD” or “Copy to Blu-ray
Disc”, then press [OK].
4 Select the title, then press the yellow button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
(All the recordings on the same date
become a title.)
With Other
Equipment
REC1/OTR
Recording Time
Automatic Stop
Continuous recording
30 min
Input AV
USB connection cable (optional)
§
video camera, etc.
DMRBWT460GN_eng.book 52 ページ ２０１６年４月１４日 木曜日 午後１２時３分