Convenient functions
SQT1111
59
When the image does not match the screen size of
the TV, you can enlarge the image to fill the screen.
2 Select “Aspect” in “Basic Operation”, then
press [OK].
3 Select the item, then press [OK].
Normal:
Normal output
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
• This function does not work on 3D contents.
• The screen mode is switched to “Normal” in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• [BD-V] [DVD-V] “Side cut” does not have any effect.
• When “TV Aspect” (> 64) is set to “Pan & Scan” or
“Letterbox”, the “Zoom” effect is disabled.
The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” appears on the
front panel display.
To cancel the HOLD function
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” disappears.
Switching the aspect ratio of the
screen
1 Display the Playback menu.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
• The playback menu can be displayed directly by
pressing [DISPLAY].
HOLD function
DMRBWT460GN_eng.book 59 ページ ２０１６年４月１４日 木曜日 午後１２時３分
To Next Page
Loading...
