Panasonic DMR-BWT720EB - Page 65

65
1. Disconnect the connector.
2. Remove 1 Screw (A) and remove Wi-Fi Module and Wi-Fi
Angle.
3. Remove 3 Screws (A), SATA Signal Cable (HDD) and
SATA Power Cable to remove HDD.
4. Put HDD upside down so as not to give a shock to HDD.
5. Remove 2 Screws (C) to remove HDD from HDD Bracket.
9.1.9. AV IO P.C.B.
1. Disconnect 2 FFCs.
2. Remove 2 Screws (A) and 1 Drive Spacer to remove AV
IO P.C.B.
CAUTION:
When inserting the FFC, pay attention as below.