64
9.1.6. BD Drive
1. Remove 4 Screws (A), Drive Power Cable and SATA
Signal Cable to remove BD Drive.
9.1.7. Rear Panel, Fan Motor
9.1.7.1. Only Fan Motor
1. Remove 2 Screws (A) and disconnect the Fan Motor
connector.
2. Remove the Fan Motor.
9.1.7.2. Rear Panel with Fan Motor
1. Remove 7 Screws (B) and 2 Screws (C).
2. Disconnect the Fan Motor connector and unlock 2
Locking Tabs (A) to remove Rear Panel.
9.1.8. HDD, Wi-Fi Module
To Next Page
Loading...
