Recording
SQT0291
32
Timer recording
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 30)
3 Press [OK].
To show programme information
Press [STATUS ].
To exit the timer recording list
Press [EXIT ].
• Programmes to be recorded with Keyword recording (> 33)
are not displayed.
To confirm and edit a timer
programme
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD TUE 07.01.2014 8:05 AM
Delete
Info
New Timer Programme
TUE 14.01
TUE 14.01
10:00 AM - 11:50 AM
11:00 AM - 11:45 AM
11:30 AM - 1:00 AM
8:00 AM - 10:45 AM
TUE 14.01
TUE 14.01
DR
HG
DR
DR
OK
OK
Keyword List
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set. (> 30)
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 107)
- programmes are deactivated, etc.
DMRBWT945GL_eng.book 32 ページ ２０１４年７月１８日 金曜日 午前１１時３１分
To Next Page
Loading...
