Panasonic DMR-BWT945 - Switching the aspect ratio of the screen; Aspect Ratio Adjustment and HOLD Functionality

Convenient functions
SQT0291
95
When the image does not match the screen size
of the TV, you can enlarge the image to fill the
screen.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “Aspect” in “Basic Operation”, then
press [OK].
4 Select the item, then press [OK].
Normal:
Normal output
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
• This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
• It may also be adjusted using the screen mode of the TV,
etc.
• The screen mode is switched to “Normal” in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• [ BD-V] [DVD-V] “Side cut” does not have any effect.
• When “TV Aspect” (> 84) is set to “Pan & Scan” or
“Letterbox”, the “Zoom” effect is disabled.
The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” appears on the
front panel display.
To cancel the HOLD function
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” disappears.
Switching the aspect ratio of the
screen
HOLD function
DMRBWT945GL_eng.book 95 ページ ２０１４年７月１８日 金曜日 午前１１時３１分