EasyManua.ls Logo

Panasonic DMR-BWT945 - Convenient functions; Network Settings: IP;DNS, Proxy, Service, Lock, and Remote Recording

Panasonic DMR-BWT945
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Convenient functions
SQT0291
86
Basic Settings
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
To set the IP address and DNS
1 Set “IP Address Auto-assignment” and
“DNS-IP Auto-assignment” to “Off”.
2 Select the item, then press [OK] to show
the respective setting.
When the router’s DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the “IP
Address” and assign the same number for
“Subnet Mask” and “Gateway Address”.
Proxy Server Settings
Check and set the connection to the Proxy
server.
Press [OK] to show the respective setting.
Network Service Settings
Second Screen Browsing
When this function is set to “On”, you can
enjoy the content you are viewing on a
Network Service application of
smartphone, etc. with the home network
on the big screen of your TV.
Lock
You can restrict using Network Service.
PIN is required to change. (> 23)
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using Network
Service.
Depending on contents, this function will
not work.
Select “Off” when the audio is warped.
Notice
Displays the terms of service for the cloud
services.
You must agree to the terms of use for the Internet
function and the privacy policy.
Remote Recording Function Settings
You must register to a service to use this
function.
For details please check the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Remote Recording function
When you set a recording from a
smartphone or a PC, etc. away from
home, set this function to "On".
Device ID
This is the device ID and device password
required for registering to and using a
service.
Initialize Device Password
The device password for this unit is
initialized.
When you initialize the device password,
you will not be able to use Remote
Recording function. To use the Remote
Recording function again, you must
re-register to the service.
DMRBWT945GL_eng.book 86 ページ 2014年7月18日 金曜日 午前11時31分

Table of Contents

Related product manuals