Panasonic DMR E50 - Changing the units settings (continued); Adding, deleting and moving channels; Auto-Setup Restart, Download

66
Changing the unit’s settings (continued)
Adding, deleting and moving channels
Use this function if:
≥Channels were not set correctly using automatic tuning.
≥A channel that should have been set wasn’t.
≥A channel’s reception is poor and you want to delete it.
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
1 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER] (10).
≥The SETUP screen appears.
2 Use [3, 4] (10) to select the “Tuning” tab and
press [2] or [1] (10).
3 Use [3, 4] (10) to select “Manual” and press
[ENTER] (10).
4 Use [3, 4, 2, 1] (10) to select the desired TV
station and use the [A], [B], [C] buttons ((29), (28),
(33)) to select “Delete”, “Add”, “Move”.
Follow the operations below.
To delete a programme position “Delete”:
Press [A] (29).
To insert a blank programme position “Add”:
Press [B] (28).
To move a TV station to another programme position “Move”:
Press [C] (33), and then use [3, 4] (10) to select the new
programme position to which you want to assign the TV station.
Press [ENTER] (10).
5 Press [RETURN] (23).
Note
≥Setting can take up to 3 minutes approximately.
≥If downloading of the setup data has been performed, only the
instruction indication “Delete” appears.
Hint
≥If you have performed Manual Tuning to enter TV stations, the
[jj] indication may appear under [Pos/Name] on the display
when programming a VIDEO Plus+ timer recording.
Auto-Setup Restart, Download
You can use the SETUP menus to start Auto Channel setting if
Auto Setup (page 17) fails for some reason.
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.
1 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER] (10).
≥The SETUP screen appears.
2 Use [3, 4] (10) to select the “Tuning” tab and
press [2] or [1] (10).
3 Use [3, 4] (10) to select “Auto-Setup Restart” or
“Download”.
4 Press [ENTER] (10) prepare for Auto Setup start or
Download start.
≥Press [ENTER] (10) again to actually start the Auto Setup or
the Download.
5 A message appears asking you to confirm the
operation.
≥Actual screens depend on the operation. Follow the on-
screen instructions.
Manual
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
Auto-Setup Restart
Download
ENTER
SELECT
TAB
Manual Tuning
Pos Name Ch
ENTER
RETURN
SELECT
Pos Name Ch
B C D
A
Delete
Add
Move
1 BBC 1 22
2 BBC 2 23
3 ITV 24
4 CH4 25
5 CH5 26
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Manual
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
Auto-Setup Restart
Download
ENTER
SELECT
TAB
B.book66ページ２００３年２月４日 火曜日 午後２時５０分