Watching broadcasts
SQT0136
23
Watching broadcasts
To switch to the channel you have previously
watched
Press [LAST VIEW ].
• This function will work only for the channels you
have watched for more than 10 seconds.
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
• When you are watching the 3D programme, subtitles and
TV Guide, etc., may not display correctly depending on the
settings. (> 39, 3D Type, Signal Format)
If you have set a ratings level (> 67, Child Lock
( Parental Rating )), you may be asked to enter
the PIN. In that case, enter the 4-digit PIN with the
number buttons by following the on-screen
instructions.
• Make a note of the PIN you have decided on
in case you forget it.
• PIN can be changed via “PIN Entry”. (> 74)
You can select from the list of channel names.
1 Press [OK].
2 Select the channel, then press [OK].
To edit the channel list
Refer to “Channel List”. (> 66)
Instructions for operations are generally
described using the remote control. (> 12)
Press [CH WX] to select the channel.
• You can also select the channel by the
following operations
- Using number buttons.
- Using Channel List (> right)
- Using TV Guide system (> 24)
- Using channel information (> 24)
If this unit request a PIN
Using Channel List
All Digital Channels
Select
View
RETURN
7
6
5
4
3
2
1
Page up
Page down
CH
DMRPWT540GL_eng.book 23 ページ ２０１４年２月６日 木曜日 午前１１時２８分
To Next Page
Loading...
