Panasonic DMR-PWT550GL - Page 55

55
USB HDD Simple AV
Scan Check
Simple AV scan check of USB HDD
The [*] sign is added every 10 sec-
onds while inspecting.
Two digits on the right side are the
progress level of the inspection
(The unit is %).
Example on the way of inspection:
When USB HDD is OK after
inspection:
When USB HDD is NG after
inspection:
[*] is the number of data of NG.
Press [7] [7] in service mode.
* When cancelling the inspection
mode while executing, do "forced
power-off".
Method:
Press [POWER] key on the main
unit more than 4 seconds.
USB HDD Check Simple quality judgement of USB HDD
When USB HDD is OK:
When USB HDD is NG:
Press [7] [8] in service mode.
Tray OPEN/CLOSE Test The tray is opened and closed repeatedly.
“*” is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller.
Item
FL Display
Key Operation
Mode Name Description (Remote controller key)