62
4. Remove 3 Screws (A) and disconnect the connector of
SATA P.C.B.to remove HDD ass'y.
5. Put HDD up and down inversely so as not to give a
shock to HDD.
6. Remove 3 Screws (B) to remove HDD from HDD Bracket.
7. Pull up SATA P.C.B. in the direction of the arrow.
9.6. BD Drive
1. Disconnect the connector of DRIVE FFC .
2. Remove the 4 Screws (A) to remove BD Drive.
To Next Page
Loading...
