64
9.10. Digital P.C.B.
1. Disconnect 1 connector (A).
2. Remove 3 Screws (A) to remove Digital P.C.B..
9.11. BD Drive
9.11.1. Upper Base Ass'y
1. Remove 3 Screws (A),and push the 2 Hooks in.
2. Lift up the Upper Base Ass'y, and pull it out to the direc-
tion of arrow.
9.11.2. Tray
1. Perform the step "9.12.1.Upper Base Ass'y".
2. Insert the Paper Clip into the hole of the bottom side, and
slide it to the direction of arrow until it can be.
3. Pull the Tray to the direction of arrow.
To Next Page
Loading...
