60
9.4.3. How to assemble Door ass'y
1. Application of the Lubricant to Door Ass'y.
a. Lubrication points on Door ass'y and Front Panel
are shown in the figure as below.
b. Since the replaced parts are not lubricated, please
apply lubricant to the specified points (RFKXGUD24).
c. Use Cotton Swab to spread thinly.
2. Install each roller of the door in the sequence as shown in
the figure.
3. Install 1 springs in place in the sequence as shown in the
figure.
To Next Page
Loading...
