53
RQT9487
With Other
Equipment
Recording broadcasts from external equipment
HDD
See also “Important notes for recording” (➡ 26).
e.g., Connecting to the AV2 terminals on the front
Turn off the unit and external equipment before connecting.
Connect to Audio/Video output terminals.
External equipment
Audio/video
cable
S Video
cable
This unit
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Preparation
Press [DRIVE SELECT] to select the HDD drive.
When the output signal from the external equipment is NTSC,
change “TV System” to “NTSC” in the Setup menu (➡ 88).
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV2 input terminals, select
“AV2”.
2 Press [REC MODE] to select the
recording mode.
DR, HG, HX, HE, HL, FR mode cannot be selected.
3 Select the channel on the other
equipment.
4 Press [
*
REC].
Recording starts.
To skip unwanted parts
Press [
h
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
g
].
Copying
To Next Page
Loading...
