Panasonic DMRBW880 - Recording from External Equipment

With Other Equipment
VQT2J70
60
Recording from external equipment
With
Other
Equip
ment
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP
≥Connect the Set Top Box (> 13)
1 While stopped
Press [INPUT SELECT] to select the
input channel.
2 Press [REC MODE] to select the
recording mode.
≥DR, HG, HX, HE, HL, HM and FR mode cannot be
selected.
3 Select the channel on the other
equipment.
4 Press [¥ REC].
Recording starts.
5 Set the time to record. (> 24)
To skip unwanted parts
Press [;] to pause recording.
≥Press again to restart recording.
To stop recording
Press [∫].

≥ It will be recorded in standard definition quality even if the programme is
in high definition quality.
≥Turn off the unit and other video equipment before
connecting.
e.g., Connecting to the AV2 or DV input terminals on the
front
§
Connect to terminals of the same colour.
When recording from the unit’s DV terminal
≥Select the audio type in “Audio Type for DV Input” (> 79).
≥When recording from DV equipment (e.g., digital video
camcorder), you can record audio/video recordings from
the DV tape only.

≥ The video quality will be degraded.
≥ While copying from DV input or executing the “Flexible Recording via AV
input” (> 61)
– Copy will stop when timer recording starts.
– Chasing playback, simultaneous rec and play, switching of input
cannot be performed.
– [-R] [-RW‹V›] [+R] [+RW] Chapter will be created automatically.
Recording broadcasts from Set
Top Box
Recording from video
equipment
DV IN
L/MONO-AUDIO-R VIDEO
AV2 IN
Audio/Video
cable
§
This unit
Other video equipment
Connect to Audio/Video
output terminals.
DV cable
(IEEE 1394,
4-pin)
DMRBW880GZ-VQT2J70_eng.book 60 ページ ２０１０年５月２４日 月曜日 午後５時３８分