Panasonic DMRBW880 - Digital Audio Output; Pcm down Conversion; Audio Delay

Convenient functions
VQT2J70
79
∫ Digital Audio Output
¾ PCM Down Conversion
Select how to output audio with a sampling frequency
of 96 kHz.
≥It will be converted to 48 kHz regardless of the setting
in the following cases.
– The signals have a sampling frequency of over
96 kHz.
– The disc has copy protection.
– “BD-Video Secondary Audio” is set to “On”. ([BD-V])
≥If “Off” is selected, signals are output as 96 kHz
≥If “On” is selected, signals are converted to 48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of 96 kHz.)
¾ Dolby D / Dolby D + / Dolby TrueHD
¾ DTS / DTS-HD
¾ MPEG
Select the audio signal to output.
¾ BD-Video Secondary Audio
([BD-V] with secondary audio)
Turn on/off the clicking sound on the menu and audio
with secondary video.
If “Off” is selected, the primary audio only is output.
∫ Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
∫ Audio Type for XP Recording
Choose the audio type when recording or copying with XP
mode.
≥The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
≥The audio becomes Dolby Digital even if you selected
LPCM when using a recording mode other than XP.
∫ Audio Type for DV Input
You can select the kind of audio when recording from the
unit’s DV input terminal (> 60).
≥If “Mix” is selected, both Stereo 1 and Stereo 2 are
recorded.
≥When recording bilingual broadcast, select the type of
audio in advance from “Bilingual Audio Selection” (> 78).
∫ Audio Type for Digital Broadcast
If the programme has both Dolby Digital and HE-AAC audio
tracks, priority is given to what you select.
≥This setting will give effect in the following conditions.
– When recorded in HG, HX, HE, HL, HM, XP, SP, LP, EP
or FR mode.
– DR File Conversion (> 43)
– Normal speed copy from the title recorded in DR mode.
(> 45, 47)
∫ Audio for HG / HX / HE / HL / HM
Recording
If the programme has multi channel audio, priority is given to
what you select.
≥This setting will give effect in the following cases.
– Convert to HG, HX, HE, HL or HM mode in “DR File
Conversion” (> 43)
– Normal speed copy in HG, HX, HE, HL or HM mode from
a title recorded in DR mode. (> 45, 47)

≥ Select “PCM” when the connected equipment cannot decode the
respective audio format.
≥ Not making the proper settings may result in noise.
≥ Sound of HE-AAC audio type is output as PCM signal regardless
of settings.
DMRBW880GZ-VQT2J70_eng.book 79 ページ ２０１０年５月２４日 月曜日 午後５時３８分