18
VQT3M28
Taking Pictures
∫ Be sure to check the following before entering the water
Check the following before diving.
≥
Is there sufficient remaining battery power?
≥ Is there sufficient memory in the card?
≥ Is the O-ring fitted evenly into the O-ring groove?
≥ Have you checked that no water leaks into the Case?
≥ Is the buckle closed firmly?
∫ Taking pictures
1 Turn the camera on.
2 Display the scene mode menu and then set [Underwater].
≥
Read the operating instructions of the digital camera for details.
3 Aim the AF area on the LCD monitor at the subject you want to focus
on.
4 Press [AF-L ] to focus.
• Press [AF-L ] again to cancel.
5 Press the shutter button fully to take the picture.
∫ Notes
≥ Before attaching the camera to the Case, we recommend setting the clock again.
(Read the operating instructions of the digital camera for details.)
≥ If there are any particles floating in front of the camera, it may focus on them instead
of the subject.
≥ If there are drops of water or dirt sticking to the front glass, you may not be able to
focus properly. Be sure to wipe the front glass before taking pictures.
Press 1 to release the lock
and then set to [ON].
Press 2 to lock.
DMW-MCTZ20-VQT3M28.book 18 ページ ２０１１年１月１３日 木曜日 午前１０時６分
To Next Page
Loading...
