15
VQT3M28
Preparation -Attaching the Digital Camera-
Read the notes on page 17 before attaching the digital camera.
Check that the ON/OFF Switch on the camera and the case is set to
[OFF], and [Rec]/[Playback] selector switch is set to [!].
≥
Remove the strap from the digital camera.
1 Push 2 up with your finger while sliding 1 to open the buckle.
2 Attach the digital camera to the Case.
≥ Be careful not to catch the shading hood 1.
3 Insert the silica gel (supplied).
≥
Always use new silica gel.
DMW-MCTZ20-VQT3M28.book 15 ページ ２０１１年１月１３日 木曜日 午前１０時６分
To Next Page
Loading...
