19
VQT3M28
Tips for Taking Pictures in the Water
When the image is too bluish in the water
1
Press [ ] several times until [ ] appears.
2 Press [AF-L ]/[ ] to adjust the white balance.
3 Press [MENU/SET] to finish.
≥ You can also press the shutter button halfway to finish.
Select the best picture
Set the flash to [ ].
Using the Auto Bracket Function (For models with an Auto Bracket Function)
≥ Each time the shutter button is pressed, 3 pictures with different exposures are
automatically recorded. You can select the desired picture from the 3 pictures.
Use Burst Mode
≥ When taking pictures of a fast-moving subject (a fish etc.), you can select your
favourite picture after taking the pictures using Burst Mode.
∫ Note
≥
WB fine adjustment (Underwater Mode) is also supported when recording motion
pictures.
(
Compatible model: DMC-TZ20/DMC-ZS10
)
The white balance can be adjusted according to water depth or preference.
≥ For more information, read the operating instructions of the digital camera.
DMW-MCTZ20-VQT3M28.book 19 ページ ２０１１年１月１３日 木曜日 午前１０時６分
To Next Page
Loading...
