700
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.2.4. Electrical
11.2.4.1. Electrical Parts (Functions of Switches and Sensors)
No. Sensor Symbol Function
1Set Switch (SW1)
Detects the setting condition of the Finisher, resets paper
jam and resets staple jam.
2 Cartridge Sensor (SW2) Detects the Staple Cartridge.
3 Staple Sensor (SW3) Detects staples.
4
Staple Home Position
Sensor
(PC13) Detects the home position for stapling.
5 Paper Feed Sensor (PC1)
Detects papers taken into paper feeder and paper jam.
Detects trigger for punching operation.
6 Paper Exit Sensor (Straight) (PC2)
Detects paper jam and paper exit.
(Straight)
7 Paper Path Sensor (PC8)
Detects paper jam and trigger of the Jogging Bar
operation.
8 Paper Exit Sensor
(Inverting)
(PC3) Detects paper jam and paper exit. (Inverting)
9 Belt Home Position Sensor (PC4) Detects home position of the belt.
10 Elevation Ceiling Sensor (PC5) Detects ceiling of the Lower Tray.
11
Jogging Home Position
Sensor
(PC6) Detects home position of the Jogging Bar.
12 Sheet Detecting Sensor (PC7)
Detects the paper when it is jogged to the position where
stapling is possible.
13 Paper Full Sensor (PC9)
Detects papers in the Lower Tray when they reach a
specified height.
14
Paper Upper Surface
Detecting Sensor
(PC10)
Detects upper surface of the papers in the Lower Tray.
Detects when papers in the Lower Tray are removed
during the stacking process.
15 Elevating Bottom Sensor (PC11) Detects the bottom of the Lower Tray.
To Next Page
Loading...
