373
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(3) Remove the Pads from the Top Cover.
(4) Lift the Front Caster slightly, and remove the
Pad. Repeat the same procedure and lift the
Rear Caster slightly and remove the Pad.
Caution:
The Finisher is equipped with Casters, and tends
to roll easily. Be sure to work in a group of two, and
exercise caution not to drop the finisher or getting
hurt. Moreover, be sure to pay attention when
shifting the Finisher to avoid deforming the Rail
Base.
(5) Open the Covers and remove all tapes and
packing materials.
(6) Close the Covers.
Caution:
The removed Tapes and Packaging Material will
be required when transporting the Machine for
relocation or repairs; it is a good idea to store them
for future use.
3. Removing the Folding Roller Releasing Plate
(1) Remove the 4 Screws, and detach the Right
Lower Cover.
(2) Remove the shipping screw, and detach the
releasing plate (front).
Tag
Right Lower
Cover
(1)
(1)
Screw
Releasing Plate (Fron
To Next Page
Loading...
