374
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(3) Remove the shipping screw, and detach the
releasing plate (rear).
Caution:
It is a good idea to store the removed Releasing
Plate and the shipping screws for future use.
(4) Reinstall the Right Lower Cover.
4. Removing the Stitcher Fixing Member
(1) Open the Front Lower Cover.
(2) Pullout the Stitcher Assembly.
(3) Remove 1 Screw, and remove the Fixing
Member from the Right Side.
Caution:
It is good idea to store the removed screws and
Fixing Member for future use.
(4) Slide the Stitcher Assembly back in.
(5) Close the Front Lower Cover.
Screw
Releasing Plate (Rear)
Front Lower Cover
Saddle Stitch Assembly
ScrewFixing Member
To Next Page
Loading...
