Panasonic DP-6030 - Page 609

609
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Fig. 5-046
(8) Remove 2 C-Rings [7], and remove the Sensor
Flag [8] and 2 Bearings [9] on the rear.
Fig. 5-047
(9) Remove 2 C-Rings [10], and remove the 2 Gears
[11] on the front.
Fig. 5-048
(10) Remove 2 Bearings [12].
Fig. 5-049
(11) Open the Saddle Delivery Tray Assembly [13].
(12) Remove 2 Screws [14], and remove the 2
Alignment Plates [15].
(13) Slide the Paper Folding Roller [16] to the front,
and pull it out in the delivery direction.
[8]
[7]
[9]
[11]
[10]
[12]
[14]
[13]
[14]
[16]
[15]