610
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
3. Installing the Paper Folding Roller.
4. Removing the Stitcher Mount Unit.
Fig. 5-050
(1) Attach the Gear [2] so that the grooved section
[1] on the Gear is facing the grooved section [1]
on the Paper Folding Roller to align the phases.
Fig. 5-051
(1) Remove the Front Inside Cover.
(See Fig. 5-032.)
(2) Remove 1 E-Ring [1], Roller [2], and Shaft [3].
Fig. 5-052
(3) Pull out the Stitcher Mount Unit [4] to the front.
[1]
[1][2] [3]
[4]
To Next Page
Loading...
