671
JAN 2006
Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.8. Appendix
11.1.8.1. Signal Names and Abbreviations
Provided below are the abbreviations and signal names used in this manual and in drawings for all the
Finisher and punch functions.
Note:
Signals enclosed by brackets [ ] are electrical signals. However, the state “1” or “0” of these analog
signals cannot be indicated, Otherwise, the state of digital signals “1” or “0” can be indicated.
Finisher Unit
BESCPSL Belt Escape Solenoid Drive Signal
BUFENTR Buffer Path Inlet Paper Detect Signal
BUFPASS Buffer Path Paper Detect Signal
CRTSET Cartridge Detect Signal
DELCLK Delivery Motor Clock Detect Signal
DROPN Door Open Detect Signal
DRSW Door Switch Signal
ENTSL Buffer Inlet Solenoid Drive Signal
ESCPSL Escape Solenoid Drive Signal
EXITSL Buffer Outlet Solenoid Drive Signal
FLPSL Flapper Solenoid Drive Signal
FSTTRAY Tray 1 Paper Detect Signal
HOOKEMP Hook Empty Detect Signal
HOOKTOP Hook Stop Position Detect Signal
JOGHP Alignment Plate HP Detect Signal
JOINT Joint Detect Signal
PDEL Delivery Detect Signal
PDLSL Paddle Solenoid Drive Signal
PENT Inlet Paper Detect Signal
SFTCLK1 Shift Motor Clock Detect Signal 1
SFTCLK2 Shift Motor Clock Detect Signal 2
SHUTCLD Shutter Closed Detect Switch Signal
SNDTRAY Tray 2 Paper Detect Signal
STOPN Shutter Open Detect Signal
STPCON Stapler Connect Detect Signal
STPDRHP Stapler Drive HP Detect Signal
STPHP Stapler HP Detect Signal
STPTY Staple Tray Paper Detect Signal
SWGCLK Swing Guide Clock Detect Signal
SWGGCLD Swing Guide Closed Detect Switch Signal
SWGOPN Swing Guide Open Detect Signal
TRAYSAF Tray Safety Switch Signal
TRAYHP Tray Home Position Detect Signal
TRYLIM Tray Upper Limit Detecting Switch Signal
To Next Page
Loading...
