QSM03-DVD003
Ref.No. : NWBG0309CV52a
Date : September, 2003
Special customer inquiry Product improvement Frequence level
Parts shortage solution Other ( ) High Low A few One
Subject :
Object : DVD-CV36, DVD-CV37, DVD-CV47, DVD-CV52, DVD-CV290
Models DVD-CP67, DVD-CP72
SA-DK10, SA-DK20
SA-HT65, SA-HT67, SA-HT70, SA-HT75, SA-HT95
SA-DM3
Object :
Parts
Content : Please refer to this supplement regarding the use of 2 types of SPM assemblies and their differences.
Since May 2002 production, the projection in the Traverse base of the (SPM) Spindle Motor Assembly has
been modified and the inner stopper has been deleted.
Therefore, in the course of servicing DVD changers and DVD Home Theater systems, you will encounter
2 types of SPM assemblies.
* There are the original Type A (with the inner stopper) and the revised Type B (without the inner
stopper). See diagrams below.
In addition, there are two types of Spindle Motor Assemblies (SPM) supplied as replacement parts.
* There are SPM TYPE 1 (short projection WITH inner stopper) and TYPE 2 (short projection
WITHOUT inner stopper). Refer to the pictures in the following page.
SPM Assembly used in the Products
Part Name Service Part #
SPM Assembly
SPM Assembly
RXQ0749B
RXQ1028
Important Information when replacing the Spindle Motor (SPM) Assembly
DVD
Cases reported (country)
Canada/Australia
Model :
Quick Service Manual
DVD-CV36/CV37 Series, DVD-CP67/CP72,
SA-HT70/HT75 Series, SA-DK10/DK20, etc.
Products
* The TRV base which has short
projection has to be equipped with
an inner stopper.
Inner Stopper
Short
Projection
Original (Type A)
Long
Projection
TRV base
New (Type B)
To Next Page
Need help?
General
