32
RQT7682
Troubleshooting guide
The LCD is dark.
≥
Adjust the brightness. (12)
Picture distorted.
≥
Some disruption is normal during SEARCH.
Menu not displayed
correctly.
≥
Restore the zoom ratio to k1.00. (19)
≥
Set the “Subtitle Position” to 0. (19)
Auto zoom function
does not work well.
≥
Turn off TV’s zoom function.
≥
Use the other preset aspect ratios or manual adjustment.
≥
Zoom function may not work well, especially in dark scenes and may
not work depending on the type of disc.
No picture on the LCD.
≥
Select a monitor mode other than “OFF” (no picture). (12, Selecting
how to show 4:3 aspect pictures on the LCD)
Picture doesn’t appear
on the television (or
the size of the picture
seems wrong).
≥
Check connections. (23)
≥
Check that the television is on.
≥
Check that the input mode on the television is correct.
≥
Check the settings in “Video—TV Aspect”. (21)
≥
Turn off the zooming feature on your television if you are using Zoom.
(19)
≥
Ensure that the unit is connected directly to the television, and is not
connected through a video cassette recorder. (23)
LCD pixels turn black
or radiate different
colors.
≥
The LCD is constructed with precision technology so 99.99 % of the
pixels are active, but of the remaining of 0.01 %, there are pixels that
may be black or emit light constantly. This phenomenon is not a
malfunction.
“/”
≥
The operation is prohibited by the unit or disc.
No On-Screen display.
≥
Select “On” for “On-Screen Messages” in Display menu. (22)
“Check the disc.”
≥
Clean the disc. (33)
≥
You inserted a DVD-R that has not been finalized.
“ ERROR 01”
≥
A problem has occurred with the battery pack. Consult your dealer.
“ ERROR 02”
≥
The battery pack has been recharging for 12 hours but has failed to
recharge for some reason. Recharge again.
“ ERROR 03”
≥
You are recharging in a location that is too hot or too cold. Recharge
at normal temperature [
i5 to i35 oC (i41 to i95 oF)].
“H
∑∑”
∑∑ stands for a
number.
≥
Trouble has occurred. The number appearing after “H” depends on
the problem. Turn the unit off and on again. Alternatively, turn the unit
off, disconnect the power source (AC or battery pack) reconnect the
power and turn the unit on again.
If the service numbers fail to clear, note the service number and
consult your dealer.
“No Select”
≥
Press [∫, –OFF], then retry the operation again.
Picture
Displays
Troubleshooting guide
P2-35 e.fm 32 ページ ２００４年４月１日 木曜日 午前９時６分
To Next Page
Loading...
