Panasonic DVD-LX8

RQT7485
16
Operating with GUI screens
Checking the play status (Progress indicator)
Main unit information
Display menu
4:3 Aspect [RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
Select how to show images made for 4:3 aspect screens on a 16:9 aspect television.
Normal: laterally stretches images made for a 4:3 screen.
Auto: expands suitable 4:3 letterbox images to fill more of the screen. Other
images appear in full in the center of the screen.
Shrink: images appear in the center of the screen.
Zoom: expands all images to fill the screen.
≥ If your television has a similar feature, use it instead for a better effect.
Zoom (You can adjust to fit different picture sizes to your television.)
[RAM] [DVD-V] [VCD]
≥ Set the TV aspect to match your television from “TV Aspect” (➜ page 19).
Press [ENTER] and select using [2 1] and then press [ENTER].
Zoom fine adjustments
a1.00 to a2.00
Subtitle Position/Brightness adjustments (➜ page 11)
Bit rate display (Shows the average bit rate of the video being played.)
[RAM] [DVD-V] [VCD]
DISPLAY
≥ To finish, press [RETURN].
Press twice.
Current play position
Number during play Play status/Play speed adjustments (➜ below)
Elapsed time/remaining time
Use [3 4] to change.
(WMA/MP3/SVCD can only display
elapsed time.)
You can slow down or speed up play [DVD-V] (Dolby Digital disc)
During play, use [2 1]. (The play speed changes in 5 steps.)
≥ To return to normal play, press [1, ON].
≥ Depending on the disc, there may be places that cannot be changed.
DISPLAY
ENTER
Press
3 times.
1
2
1 Use [34] to select the menu.
2 Use [2 1] to select the item
and [34] to set.
≥ To finish, press [RETURN].
Normal
x1.00
00
OFF
Operating with GUI screens
rqt7485e.book16ページ２００４年１月２０日 火曜日 午後１２時４分