RQT7485
17
Play menu
Picture menu
Audio menu
Repeat play between two points (A-B repeat play)
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Press
[ENTER]
at the starting point/ending point. To cancel, press
[ENTER]
again.
Repeat play (➜ page 10)
Play mode (Display only) [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
--- : Normal play ALL: All group ([DVD-A]) PGM: Program RND: Random
Position marking (Marker)–Up to 5 points ([RAM] Up to 999 points)
Press [ENTER] to perform the following operations. ([RAM] Perform the
following after using [1] to select “¢”.)
To place a marker# Press [ENTER].
To place another marker# Use [2 1] to select “¢” and press [ENTER].
To recall a marker# Use [2 1] to select a marker and press [ENTER].
To erase a marker# Use [2 1] to select a marker and press [CANCEL] on
the remote control.
≥ Markers you added on this unit are cancelled when you open the disc lid
or turn the unit off.
[RAM] Adding more than 11 markers
1. Use [2 1] to select the marker pin icon.
2. Use [34] to select “11–20”.
Picture mode [RAM] [DVD-A] [DVD-V] [VCD] [JPEG]
N (Normal): Normal mode
C1 (Cinema 1): Mellows images and enhances detail in dark scenes.
C2 (Cinema 2): Sharpens images and enhances detail in dark scenes.
Transfer mode (LCD, NTSC disc only) [RAM] [DVD-A] [DVD-V] [VCD]
Select the method of conversion to suit the type of material being played.
Auto1 (normal): for viewing film material
Auto2: for viewing film material (the same as Auto1, but able to convert 30-
frame-per-second progressive video)
Video: for video material
Advanced surround (➜ page 10)
Dialogue enhancer (Better movie dialogue clarity)
[DVD-A] [DVD-V] (Discs with a center channel recorded in Dolby Digital)
OFF
N
Auto1
SP
OFF
OFF
Operating with GUI screens
rqt7485e.book17ページ２００４年１月２０日 火曜日 午後１２時４分
To Next Page
Loading...
