RQT7485
19
Video
Audio
§ [Asia[ MPEG is not available.
TV Aspect
Choose the setting
to suit your television
and preference.
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it
fills the screen (unless prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9
: Widescreen television
Use the television’s screen modes to change the way
the picture is shown.
Still Mode
Specify the type of picture
shown when paused.
≥ Automatic
≥ Field: The picture is not blurred, but picture quality is lower.
≥ Frame: Overall quality is high, but the picture may appear blurred.
NTSC Disc Output
Choose PAL 60 or NTSC
output when playing NTSC
discs.
≥ PAL60: When connected to a PAL television
≥ NTSC: When connected to an NTSC television
PCM Digital
Output
(Only when connected
using a digital optical
cable
➜
page 21)
Check the digital input limitations of the equipment you connect and
select the maximum sampling frequency of PCM digital output.
Off:
When not connected using a digital optical cable
Up to 48 kHz:
When connected to equipment compatible with 44.1 or 48 kHz
Up to 96 kHz:
When connected to equipment compatible with 88.2 or 96 kHz
Up to 192 kHz:
When connected to equipment compatible with 176.4 or 192 kHz
≥Signals that exceed the set maximum frequency and signals from copy-
protected discs are converted to 48 or 44.1 kHz.
≥
Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they
can handle 96 kHz. Read your equipment’s operating instructions for details.
Dolby Digital
(Only when connected
using a digital optical
cable
➜
page 21)
≥ Bitstream
≥ PCM
Select “Bitstream” when the equipment can
decode the bitstream (digital form of multi-channel
data). Otherwise, select “PCM”.
≥ If the bitstream is output to the equipment
without a decoder, high levels of noise can be
output and may damage your speakers and
hearing.
DTS Digital
Surround
(Only when connected
using a digital optical
cable
➜
page 21)
≥ PCM
≥ Bitstream
MPEG
§
(Only when connected
using a digital optical
cable
➜
page 21)
≥ PCM
≥ Bitstream
Dynamic Range
Compression
(Dolby Digital only)
≥ Off
≥ On: For clear dialogue when listening at low volume.
Audio during
Search
Choose whether to have
sound during search
≥ On ≥Off
Audio will be heard when playing some DVD-Audio despite the settings
made here.
Changing the player settings
rqt7485e.book19ページ２００４年１月２０日 火曜日 午後１２時４分
To Next Page
Loading...
