13
How to use
• Make sure the warming make-up removal plate is not
cracked or dirty before use.
• The appliance will not operate when connected to the
AC adaptor. The AC adaptor is used only for charging
the appliance.
Warming make‑up removal
The warming make-up removal plate loosens and easily
removes make-up.
1
1
Press the warming make‑up removal switch and
select the desired temperature.
Warming make-up removal plate temperature options
Low (
): approx. 43 °C
High ( ): approx. 48 °C
• Pressing the warming make-up removal switch
cycles through the “Power OFF” “Low ( )”
“High ( )” options.
• The temperature is always set to “Low ( )” when
the power is turned on.
• It is recommended to use the appliance at the
“Low ( )” setting when rst beginning use.
Notes
• The warming make-up removal mode indicator
ashes while warming up.
• It takes approximately 30 seconds for the
appliance to reach its usable temperature.
(Assuming a room temperature of 25 °C)
• The warming make-up removal plate temperature
varies depending on the usage environment.
• The set temperature may not be reached if the
ambient temperature is below 15 °C.
2
2
Apply make‑up remover (See page 12.) to your
forehead, chin, and both cheeks.
• You can also use the appliance with make-up
remover applied directly to the warming make-up
removal plate.
3
3
Once the warming make‑up removal mode
indicator starts glowing, apply the warming
make‑up removal plate to your skin and begin to
move it around your face.
• Lightly apply the warming
make-up removal plate to your
skin and glide around your face
in a circular motion from the
inside out.
Leave areas with heavy make-
up such as around eyes as the
last step to prevent the make-
up from spreading.
Be particularly gentle when using
the appliance around the eyes.
Do not try to force the warming
make-up removal plate into
hard-to-reach areas. Use your
hands to apply make-up
remover to these areas.
PB017051 - EH-XC10 ������_(01EN)_11-19-18.indd 13 2018/11/19 8:41:30
To Next Page
Loading...
