How to Use
29
Delete is completed
once the flashing stops.
To start the registered program
Press to turn on the
power.
（ When not massaging, the power is turned off automatically
if 3 minutes or more pass without operation.）
Select and press one of the
automatic courses that is
registered using the USER
button.
(Example: “SWEDISH”)
Select one of the USER
buttons that is registered.
●
Registered USER button will light. (Example: )
Massage with registered setting will start after the body scanning.
● When an unregistered course is selected, the standard automatic course massage is applied.
However, the “Heat” massage heads on/off settings, “Foot Heat” on/off settings, temperature settings
and volume settings registered to the USER button are applied. (See page 28.)
◦❶
To delete the registered settings
(Example: )
Press.
Press and hold for
more than 3 seconds.
Press.
Press.
◦❷
Press to turn on
the power. Press the
button you want to
delete.
Press again
during the button
flashes (about
10 seconds).
Press again and
hold for more than
3 seconds until the
button changes to
flashing.
To Next Page
Loading...
