56
The following sounds and sensations occur while using the unit. However, they occur due to the
construction of the unit and are perfectly normal.
If these sounds have grown louder, there may be a malfunction.
●Contact the nearest authorized service center for inspection and repair.
Problem Cause and Remedy
It is not possible to
massage hands and arms.
The air plug on the armrest is disconnected. See page 15.
The unit will not operate at all.
●
Upper body (neck to lower back) massage
●Lower body massage
●Hands and arms massage
The unit has been damaged.
The power cord or power plug is abnormally hot.
● Sounds and feels like the massage heads are
straining to get over wrinkles in the cloth
●
Operating sounds of the kneading or tapping actions
● Creaking sound when the massage heads are in
operation
● Operating sounds when the massage heads move
up or down
● Sounds of the belt rotating
● Motor sounds
● Sounds when the massage heads change from
“push” to “pull”
● Sound when sitting down
● Sound of the comfort cushion moving over the
armrest when the seat is reclining
● Rubbing sound of the massage heads on the seat
fabric
● Sound of discharging air
● Sounds when air pressure is applied
● Rattling sound of the legrest
● Sounds of the pump beneath the seat
● Sounds of the valve beneath the seat
● Clunking sound during leg stretch or operation
● Sounds of air moving
● Sounds of the foot massager sliding
● The power plug has been disconnected. See page 19.
● The power switch on the unit has not been turned on.
● An automatic courses button or manual operation button hasn’t
been pressed after pressing
.
Sometimes the power wont turn
on when
is pressed again
when a massage has finished.
Approximately 5 seconds are required for program termination after
a massage finishes. Wait at least 5 seconds once all movement
has stopped before pressing
.
If a malfunction or breakdown occurs, stop
using the chair immediately and unplug the
power plug from the wall socket. (Failure to do
so may result in smoke/fire or electric shock.)
<Examples of malfunctions/breakdowns>
・ The chair does not operate when the power
switch is turned on.
・ The power supply is interrupted when the
power cord is moved.
・ Burning smells or abnormal sounds occurring
dur
ing operation.
・
The unit becomes deformed or unusually hot.
→ Contact an authorized service center
immediately for inspection/repairs.
To prevent accidents, be sure to contact an authorized service
center.
Sounds and sensations of the unit
Troubleshooting
（Continued）
To Next Page
Loading...
