How to Use
33
Press to start the action.
◦❹
To change an action in the middle of a massage
If you want to massage with tapping action only
● The massage heads will move to selected position automatically to start the massage after
the body scanning is completed. See page 24 about body scanning.
● See pages 34 – 35 for setting the massage in accordance with your preferences.
● When a massage to the same location has continued for 5 minutes, it will automatically move
up approximately 3 cm.
Select your favorite one again in steps ❷ to ◦❹.
● ◦
Press within approximately 40 seconds after reselecting an action in step
❷
, otherwise the
reselection will be cancelled automatically.
NECK/SHOULDER/FULL BACK
…
Normal body scanning.
MIDDLE BACK/LOWER BACK …
Simple body scanning. (The massage heads will not
come up to the shoulder position.)
Body scanning for manual operation
① Press to turn on the power.
② Select
.
③ Start the tapping action by pressing
.
・Body scanning will not be performed.
・ To change the action, select with steps ❷ – ❹ on the previous page.
▶Continued on the next page
To Next Page
Loading...
