How to Use
Lift your soles slightly and the sole massage section returns.
Push with the soles of
your feet to slide the sole
massage section out.
Adjusting the reclining angle and legrest to massage in relaxing position
To adjust the reclining angle and
the legrest angle:
Adjust by pressing
.
●See page 41 for description on how to adjust the reclining angle and the legrest.
To adjust the amount
of sliding of the sole
massage section:
Back intensity can be adjusted by pressing on the “+” or “–” of the BACK INTENSITY.
●For safety reasons, it is designed not to increase the intensity drastically.
●The intensity of manual operation is displayed.
●Level of intensity that can be adjusted differs depends on the action.
Intensity might increase drastically when the intensity is increased in multiple steps.
Always increase the intensity one step at a time, checking how it feels.
Caution
Adding tapping actions to the current operation
Adjusting the back intensity
Press .
● You can select tap on/off every time it is pressed.
You cannot select on/off when you are massaging only with the tapping action.
To turn “Heat” massgae heads and “Foot Heat” On and Off
You can turn off/on the “Heat” massage
heads by pressing
.
You can turn off/on the “Foot Heat” by
pressing
.
Lit: “Heat” massage heads On.
Off: “Heat” massage heads Off.
Lit: “Foot Heat” On
Off: “Foot Heat” Off
● Temperature cannot be adjusted.
● For details, see page 31.
High
Low
● Temperature can be adjusted
between two levels.
● For details, see page 31.
● Sense of warmth differs depending on your body shape, the massage body part, massage action,
clothing, and room temperature.
To Next Page
Loading...
