4) Turn on the power and raise the
backrest to the upright position
①
Insert the power plug into the power outlet.
•
Always be sure to insert into an AC 220 V plug.
②
Confirm the lock switch key is set to the "open" position.
③
Confirm the power switch is set to the "on" position.
lock
open
lock switch power
off on
OI
②
③
①
Unit Body
Rear Side
Watch your
step to prevent
tripping on
power cord or
the like.
AC 220 V
④
Press on the controller twice.
•
Press it once, and then press it again
after the screen appears.
•
Backrest will rise automatically.
Setting up the massage lounger
EN11
To Next Page