Panasonic EP-MAK1

lock switch
onoff
lock
open
power
②
③
This is initially
inserted in the lock
switch of the power
switch section prior to
leaving the factory.
●
Lock switch key (1 pc.)
4 mm
(Cross section)
●
Allen key (1 pc.)
●
Attachment screws
(M6 x 29), Silver
(2 pcs)
4) Turn on the power and raise the
backrest to the upright position
①
Insert the power plug into the power outlet.
•
Always be sure to insert into an AC 220 V plug.
②
Confirm the lock switch key is set to the "open" position.
③
Confirm the power switch is set to the "on" position.
①
Unit Body
Rear Side
Watch your
step to prevent
tripping on
power cord or
the like.
AC 220 V
④
Press on the controller
twice.
•
Press once, and then
press again approx.
1 second later. Backrest
will rise automatically.
Setting up the massage lounger
EN11