Panasonic EP-MAK1

Screen displays during massaging operations
⁃
Press the displayed buttons to operate.
⁃
The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes.
<Viewing screens>
The "Full body auto massage" course is used as an example for the screen displays shown below. Buttons and status
displays vary, depending on the selected course.
User display
• The selected user is displayed.
(EN22 to EN24)
• The display is not shown when
"Guest" is selected.
Returns to the previous screen
Displays the remaining time
Displays the operation
(
EN26)
Operations can be adjusted
(EN30 to EN34
).
Displays the course
(EN23 to EN25)
Settings button
(EN35)
Help button
(EN35)
• Settings button and Help button
are displayed regardless of the
selected course.
⁃
The display of body parts can be switched between upper half
of body and full body.
⁃
The display of body parts cannot be switched while the
program is being edited. (EN25)
⁃
The screen on the right is displayed when the
air course or operations for body parts that only
activates air is selected.
(See EN26 for regarding air massage.)
Sole
• rotates during
operation.
Air (Example: In case of air arm course)
Arm/Leg/Sole actions
Turning operations OFF/
ON, Intensity of actions
display (EN32 to EN33)
Setting of air: Off
Setting of air: On
Air operating
The color of the
body part changes
continuously.
Massage rollers
• The color becomes darker as
the pressure on the massage
rollers becomes higher.
Display of the operation, position, and pressure
⁃
The statuses of massage rollers in operation, as well as sole and air are displayed.
(The display indicates rough movements; actual movements or sensations may vary.)
Press
Press
Part names and functions of the controller
EN17