Panasonic ES-MT22 - Replacing Parts and Lubrication

54
English
►Cleaning with the short brush
• Clean the inner blades using the
short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the blades
as it will damage the inner blades
and affect their sharpness.
Replacing the system outer foil and
the inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and
lift the outer foil section upwards.
►Attaching the outer foil section
Push down evenly on the left and right
sides until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press on the smooth rollers.
• Do not press the system outer foil release buttons
with excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Ensure the direction is correct, and press rmly until
it clicks.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
►Replacement parts
Replacement parts are available at your dealer or
Service Center.
Replacement parts
for ES‑MT22
System outer foil WES9087
Inner blades WES9068