Panasonic ES-MT22 - Specifications

60
English
This gure must only be used when disposing of the
shaver, and must not be used to repair it. If you
dismantle the shaver yourself, it will no longer be
waterproof, which may cause it to malfunction.
• Remove the shaver from the AC adaptor.
• Press the power switch to turn on the power and then keep
the power on until the battery is completely discharged.
• Perform steps 1 to 5 and lift the battery, and then
remove it.
• Take care not to short circuit the positive and negative
terminals of the removed battery, and insulate the
terminals by applying tape to them.





For environmental protection and
recycling of materials
This shaver contains a Lithium‑ion battery.
Please make sure that the battery is disposed of at an
ofcially assigned location, if there is one in your country.
Specications
Product name Skin Care Shaver
Product model ES‑MT22
Rated input
100‑240 V
50‑60 Hz
180 mA
Rated output
4.8 V
1.25 A
Charging time
Approx. 1 hour (at the ambient
temperature of 20 °C)
Place of origin
Main body: Japan
AC adaptor: China
Date of production
See engraving on the commodity.
Execution standard
GB 4706.1
GB 4706.9
This product is intended for household use only.