Panasonic ES-MT22 - Page 58

58
English
Problem Action
The AI beard sensor
responds even though
the shaver is not in
contact with the skin.
When the shaver is
extremely dirty, remove the
foil frame and wash with
water.
(See page 52.)
Replace the system outer
foil and/or inner blades.
Expected life of system
outer foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
The power turns off
during
MOISTURIZING mode
or PURIFYING mode.
The appliance beeps twice if
the ion plate and ion panel are
not making contact with skin. If
there is no contact for
continuous 30 seconds, the
appliance beeps three times
and the power turns off
automatically. (See page 42.)
Problem Action
The ion plate does
not heat up.
The ion plate may not heat
up if the ambient temperature
is low. (See page 48.)
Please charge the
appliance. (See page 43.)
If the temperature level is
set to “OFF,” press the
WARM switch and select
the desired temperature
level. (See page 45.)
The MOISTURIZING
lamp or PURIFYING
lamp do not glow.
Apply sufcient lotion to
your face.
Make full contact with the rear
ion panel. (See page 42.)
Press the ion plate rmly
against the skin. (See
page 42.)
Wet your hands if they are dry.
The driving sound
changes while shaving.
The AI beard sensor is
operating. The sound
changes depending on the
beard thickness.