Panasonic ET-DLE035 - Attaching the Lens

ENGLISH-5
Guide groove
Lens mount cover
Positioning guide
Fixed-focus lens
1) With this lens already passed
through the lens mount cover that
came with your projector, align the
positioning guide with the guide
groove on the projector, and insert
the lens fully.
z
There is a red dot at the bottom right end of the
positioning guide.
2) Turn the xed-focus lens clockwise
until you hear a click.
3) Attach the lens mount cover to the
projector.
z
Turnthelensmountcoverclockwisetoxitin
place.
Attention
z
Gently turn the projection lens counterclockwise
to check that it will not fall out.
Attaching the Lens
Attaching the Lens / Detaching the Lens (continued)
*Unlessspeciedotherwise,theillustrationsintheseoperatinginstructionsshowthelensusedwiththe
PT-DZ870 projector.